Tracking and Identity Solutions – Cancard Inc.

EN | FR

KETTLE TAGS

KettleTag plus the metal tags for Fabricators and Galvanizers, is the only galvanizing tags with text and barcodes that survive the entire galvanizing process. You don’t have to remove your metal tags before the acid dip, or before the molten zinc bath.

The Only Galvanizing Tags with Text and Barcodes that Survive The Entire Galvanizing Process

The American Galvanizer’s Association lists 9 steps in the hot dip galvanizing process. Since 2001, our KettleTag®PLUS has been surviving them all.

Attach one tag and you’re done. KettleTag®PLUS means you don’t have to remove your metal tags before the acid dip, or remove your paper tags before the molten zinc bath. No removing; no reattaching.

  • Increased efficiency for galvanizers
  • Traceability and error-proof installations for fabricators
  • Eliminates unsafe handling
  • Processes vary. Call for samples and test KettleTag®PLUS in your process

Industry: Metal galvanizing

Typical Customer: Galvanizers and fabricators

Purpose: Tracking work pieces through the entire galvanizing process

Resistance Heat: 1000°F (538°C) after removal of protective laminate

Chemical: Tags legible after most caustic/acid rinses (10 minutes each) and molten zinc bath

Abrasion: Moderate

Ultraviolet: Highly resistant to sunlight and fading Sizes Width: 3.0 in (76 mm)

Lengths: to customer specification, not less than 1.0 in (25 mm)

Typical Lengths: 3.0 in (76 mm)

Composition: Metal with high contrast laser-markable coatings

Available Colors White and Yellow